New Delhi, September 27: A joint report in the Tuesday Mathura train incident, in which an electric multiple unit (EMU) train broke the buffer dead end and entered platform number 2, has found that the staffer was watching his mobile phone while handling the train and was mildly drunk, sources have said. The report, according to the sources, while narrating the prima facie reason of the incident, said that according to the Crew Voice & Video Recording System (CVVRS), after the train arrived at the platform, a staffer named Sachin entered the DTC cab (engine) while watching his mobile phone.
It said that while carelessly putting his bag on the throttle of the engine, he again got busy on his mobile. The throttle, due to the pressure of the bag, went into forward position and let the EMU move towards the platform. "It broke the dead end of the platform and half of the coach climbed onto the elevated portion of platform number 2, leading to breakdown of OHE (overhead wire)." Uttar Pradesh Train Accident Video: Train Coming From Delhi Derails, Climbs Onto Platform at Mathura Junction Railway Station, One Injured.
The report also said that a breathalyzer test conducted on Sachin showed a reading of 47 mg/100 ml which is considered to be mildly drunk. "He has been sent for a medical test in which his blood sample will be taken to find out the exact level of alcohol consumption," a source from the Agra Railway Division, said.
Divisional Railway Manager Tej Prakash Agrawal has suspended five persons including Sachin in connection with the incident. Of the other four, Harbhajan Singh, Brajesh Kumar, and Kuljeet are technical staff and Govid Hari Sharma is a loco pilot. "We have suspended five persons and further detailed investigation is on," Agarwal said. Uttar Pradesh Train Accident: EMU Train Coming From Shakur Basti Derails, Climbs On Platform At Mathura Railway Station, No Casualties Reported (Watch Video).
In one of its observations, the joint report said that generally technicians receive the DTC cab (engine) key, however, in this case, the technician sent Sachin to receive the key. Giving the brief history of the incident, the report said that the train arrived at Mathura station at 10.49 pm. After the loco pilot got relieved from his duty and came out of the cab, Sachin entered the cab to take the keys. Within a minute of his entering the cab, it started moving, broke the dead end and half of its portion climbed onto the platform.
Sachin in a written statement said that as per the instruction of his duty in-charge, he asked for the key of the cab from the loco pilot who told him that it was inside the cab. According to his statement, when he entered the cab and put his bag inside there, the train started moving on its own. He said that he got scared and by the time he applied the emergency brake, it had entered the platform. He said that he informed his in-charge about it and when he tried to find out the reason why the train started moving, he found that the throttle was in forward position and key was also in position.
In his statement, he blamed the loco pilot for keeping the train functions in "switched on" position. However, the loco pilot in his statement said that he had handed over the key to Sachin before the latter entered the cab. The joint report has mentioned Sachin as ETL staff whereas in his statement, Sachin has mentioned his designation as helper.
The EMU starts from Delhi and covers various local stations before terminating in Mathura. The platform number 2 starts from the train's terminating point where a buffer dead end has been created.
(This is an unedited and auto-generated story from Syndicated News feed, LatestLY Staff may not have modified or edited the content body)